Cansado dos sistemas de tubos bowden e suas desvantagens tais como manutenção complicada, troca de filamento demorada, incompatibilidade de impressão com filamentos flexíveis entre outros?
O Bondtech DDX Direct Drive eXtruder para impressoras 3D creality é um kit de upgrade que substitui o sistema bowden original por uma configuração direct drive.
É um extrusor Dual Drive de alto desempenho baseado no Mini Geared BMG Bondtech.
Compatível com os seguintes modelos de impressoras da marca Creality:
- CR-10S Pro;
- CR-10S Pro v2;
- CR-10 Max;
Compatibilidade de Múltiplos Hotends
Este modelo foi criado para ser compatível com o hotend original de cada modelo de impressoras 3D da marca Creality.
Os utilizadores também podem actualizar o hotend para Copperhead™ ou Mosquito™.
Este produto inclui:
- 1x DDX Extruder
- 1x Nema17 Pancake stepper motor
- 1x Thumbscrew Assembly
- 1x 70cm Stepper motor extension cable
- 1x 60cm PTFE tube
- 1x 7cm Capricorn tube
- 4x Zip-ties
- 3x M3x12mm screw
- 2x M3x20mm screw
- 1x M3x10mm button head screw
- 1x 10079-42 SLS Fan Shroud
- 1x 10079-41 SLS Fan Holder
- 1x 10079-44 SLS Bowden Adapter
- 1x M3x18 Screw
- 1x M3x20 Screw
- 2x M3x8 Screw
- 2x M3 5mm Square Nut
Using a bed probe with DDX
The DDX was designed to allow space for the bed probe to be attached to the x-carriage.
In models where there is no space to attach a bed probe like the BLtouch, to the X-carriage, a mount can printed and attached to the right hand side of the DDX.
Bondtech DDX Direct Drive eXtruder
This Direct Drive eXtruder from Bondtech is a high performance, high reliability 1,75mm Dual Drive extruder for Creality 3D printers, based on our very popular BMG.
Bondtech’s unique Dual-Drive technology combined with either the factory hotend or for even better performance the industry leading hotends Copperhead™ or Mosquito™ from SliceEngineering gives you a direct drive extruder with problems free material feeding and enables the use of a wider range of materials.
The housing parts are printed with PA12 (polyamide) for maximum strength and precision using industrial grade SLS technology.
Make your 3D printer even better
Bondtech DDX Direct Drive eXtruder for Creality is designed to give the user more options – different materials; higher flow and/or wider nozzles; thinner layers – and achieve a higher print quality.
The DDX is based on the BMG Bondtech Mini Geared extruder featuring our unique Dual-Drive technology. The DDX housing design provides an effective Hot-End cooling.
With the 3:1 gearing ratio, high resolution prints with small nozzles or high flow prints with bigger nozzles can be achieved.
When upgrading your Creality with DDX
Know more about the different ways to upgrade your Creality with DDX here:
The 4 Phases of Bondtech DDX for Creality