500ml Dental LCD Series Resina Impressão 3D LCD e DLP UV (385 - 420nm) Gypsum White - FORMFUTURA

A FormFutura foi fundada em 2012, em Amesterdão, Holanda., de produção de filamentos para impressão 3D de alta qualidade.
Tornou-se rapidamente numa marca inconfundível com clientes em todo o mundo.

Formfutura Dental LCD Model Resin is a high-precision photopolymer resin designed for accurate modelling of dental models, aligner models, gums, teeth, crown and bridge models with removable dies. Dental LCD Model is specifically engineered to work with all open source LCD and DLP 3D printers in the range of 385 - 420nm.

Dental LCD Model resin has a surface finish and color similar to gypsum, which perfectly accentuates depth and detail in the dental model. Formfutura Dental LCD Model resin is meant for modelling purposes only and not for intraoral use.

Key features

• High-resolution 3D printing with fine detail
• Almost Odorless processing
• Excellent dimensional accuracy and low shrinkage
• Gypsum-like texture and color
• Temperature resistant for dental aligner production
• Compatible with all open source LCD and DLP 3D printers in the range of 385 - 420nm

Applications

• Models of dentures
• Implant models
• Crown and bridge models
• Models of gums
• Orthodontic models

Resin properties (uncured liquid)

• Viscosity: 700 cps at 25°C
• Density: 1.18 g/cm2

Mechanical properties

Test method on post cured objects through 30 minutes high power LED curing.

Please note that the above-displayed values can vary with individual machine processing, post-curing parts,  geometry, print orientation, print settings, and temperature.

Preparation(s) before starting to print

• Shake the bottle for at least 2 minutes before each use.
• After shaking the bottle, leave the resin to rest for 10 minutes to let air bubbles get out of the resin
• • The resin can be poured back from the vat into the bottle once your print is finished
• Always use protective measurements like safety glasses and nitrile gloves when handling resins.

General printing guidelines

• Burn-in layers: 2x  170 sec
• Base layer curing times at 50 microns:  ±14 - 17 sec

Post-processing

• We do advise you to post-process your 3D print in order to achieve the material properties
• • Rinse your 3D printed object in IPA or (Bio)Ethanol for approximately 5 minutes
• An ultrasonic cleaner is preferred/recommended
• • Make sure that IPA and/or (Bio)Ethanol rinsed objects are perfectly dry before further post-curing
• Place the rinsed parts in a well-ventilated area for at least 30 minutes, or use pressurized air for at least 2 minutes
• • Cure your object in a high power curing chamber for approximately 20-30 minutes at 65° C
• The preferred curing wavelength is between 300-410nm

Safety

Please always be aware that when 3D printing with resins that you are working with chemicals and that you should always be cautious and use the personal protective equipment as stipulated in our safety data sheets.

• Always wear Respiratory Protection when sanding/cutting the resin object.
• Always use nitrile gloves when handling resins and uncured resin objects.

Utilização:

1. Agitar bem antes de utilizar. Evite a luz solar direta durante a utilização.
2. Não beba e mantenha-se fora do alcance das crianças.
3. Sugerimos que use uma máscara e luvas para evitar o contacto direto com a pele e manter a ventilação interna
4. Se ocorrer contacto com a pele acidentalmente, lave imediatamente com muita água. Consulte um médico, se necessário.
5. Filtrar a resina da cuba para a despejar no recipiente se não for utilizada dentro de 48 horas. A resina contaminada pode causar problemas de impressão.

Como armazenar:

1. Mantenha-se afastado de vedações ligeiras à temperatura ambiente. (A luz solar contém muita luz UV, solidifica a resina fotosensível)
2.  Recomenda-se guardar a resina abaixo de  15 -35 ℃ num recipiente. Evite qualquer ambiente húmido ou com pó.
3.  A resina é estável em diferentes condições climáticas e também é fácil de armazenar, sendo superior a outras resinas.

Embalagem compacta e segura:

1. Garrafa de alumínio espessada completamente protegida da luz. Garrafa à prova de fugas completamente embrulhada com um saco de plástico bolha.

Download:
Technical and Safety Data Sheet

Características:

Dental LCD Series LCD UV (385 - 420nm) Gypsum White - Tipo de Produto

500ml - Quantidade
Branca - Cor