A FormFutura foi fundada em 2012, em Amesterdão, Holanda., de produção de filamentos para impressão 3D de alta qualidade.
Tornou-se rapidamente numa marca inconfundível com clientes em todo o mundo.
FormFutura Economy LCD Resin is our entry level 3D printing resin. This resin is ideal for beginners and prints with a very limited smell. It combines accuracy with short curing times and a nice matte surface finish. Our Economy LCD Resin makes resin 3D printing more accessible.
Resin printing doesn’t have to be more expensive than 3D printing with filament!
Important key features
- Easy to use general purpose LCD resin.
- Excellent printability properties & limited smell.
- Matte surface finish with fine detail.
- Good compatibility with all DLP and LCD / MSLA 3D printers in the range of 385 – 420nm.
Suitable applications
- 3D printing figurines, miniatures and models.
- 3D printing functional prototypes.
- 3D printing end-use products.
Physical properties after post curing
This data provided for those properties are typical values, and should not be construed as sales specifications.
Specimen printed in ZXY Orientation (ISO 52921) and examined according to ISO 17296-3.
Please note that the above-displayed values can vary with individual machine processing, post-curing parts, geometry, print orientation, print settings, and temperature.
Specimens have been post-cured for 30 minutes with 200W and 405nm UV LED conditioned for 72 hours at 23°C and 50% humidity.
Preparation(s) before starting to print
-
- Shake the bottle for at least 2 minutes before each use.
- After shaking the bottle, leave the resin to rest for 10 minutes to let air bubbles get out of the resin
- The resin can be poured back from the vat into the bottle once your print is finished
- Always use protective measurements like safety glasses and nitrile gloves when handling resins.
Post-processing
- We do advise you to post-process your 3D print in order to achieve the material properties
-
- Rinse your 3D printed object in IPA or (Bio)Ethanol for approximately 5 minutes
- An ultrasonic cleaner is preferred/recommended
-
- Make sure that IPA and/or (Bio)Ethanol rinsed objects are perfectly dry before further post-curing
- Place the rinsed parts in a well-ventilated area for at least 30 minutes, or use pressurized air for at least 2 minutes
-
- Cure your object in a high power curing chamber for approximately 20-30 minutes at 65° C
- The preferred curing wavelength is between 300-410nm
Safety
Please always be aware that when 3D printing with resins that you are working with chemicals and that you should always be cautious and use the personal protective equipment as stipulated in our safety data sheets.
- Always wear Respiratory Protection when sanding/cutting the resin object.
- Always use nitrile gloves when handling resins and uncured resin objects
Utilização:
- Agitar bem antes de utilizar. Evite a luz solar direta durante a utilização.
- Não beba e mantenha-se fora do alcance das crianças.
- Sugerimos que use uma máscara e luvas para evitar o contacto direto com a pele e manter a ventilação interna
- Se ocorrer contacto com a pele acidentalmente, lave imediatamente com muita água. Consulte um médico, se necessário.
- Filtrar a resina da cuba para a despejar no recipiente se não for utilizada dentro de 48 horas. A resina contaminada pode causar problemas de impressão.
Como armazenar:
- Mantenha-se afastado de vedações ligeiras à temperatura ambiente. (A luz solar contém muita luz UV, solidifica a resina fotosensível)
- Recomenda-se guardar a resina abaixo de 15 -35 ℃ num recipiente. Evite qualquer ambiente húmido ou com pó.
- A resina é estável em diferentes condições climáticas e também é fácil de armazenar, sendo superior a outras resinas.
Embalagem compacta e segura:
- Garrafa de alumínio espessada completamente protegida da luz. Garrafa à prova de fugas completamente embrulhada com um saco de plástico bolha.
Características:
Economy LCD Series Resina Impressão 3D LCD e DLP UV (385 – 420nm) – Tipo de Produto
1000ml – Quantidade
Red – Cor